Ethernet Switches & Routers

Reply
Highlighted
Frequent Contributor
Posts: 124
Registered: ‎07-20-2015
Accepted Solution

Clear Crash Dump Info

I have a 6450-C12-PD switch that shows this each bootup.

 

*** Crash dump information is available, please collect it using "supportsave" CLI ***

 

How do I clear this crashdump information?

 

 

Brocade Moderator
Posts: 100
Registered: ‎02-04-2015

Re: Clear Crash Dump Info

Hi NETWizz,

 

You can use the command "clear support" to remove the crash dump information.

 

Regards,

Os

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers.

All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution" .
Frequent Contributor
Posts: 124
Registered: ‎07-20-2015

Re: Clear Crash Dump Info

Doesn't seem to be an option on (6450-C12-PD):

SSH@StatePark#clear
  access-list              Clear ACL counters
  acl-on-arp
  arp                      Arp table
  cable-diagnostics        Clear cable Diagnostics
  dhcp                     dhcp snooped ip-bindings
  dot1x                    802.1X data
  fdp                      Reset CDP/FDP information
  gvrp                     GVRP data
  ip                       Clear IP Data
  ipv6                     Clear IPV6 Data
  link-keepalive           Link Layer keepalive
  lldp                     Clear LLDP information
  logging                  System log
  loop-detection           Clear statistics, and enabled err-disabled ports
  mac-address              Mac address table
  mac-authentication       Flush the MAC authentication tables
  notification-mac         Clear mac-notification stats
  port                     Clear Port Data
  public-key               remove authorized client public key
  radius                   Clear radius stat/queue
  rate-limit-state         Clear rate-limit
  rmon                     Clear RMON Data
  snmp-server              Clear SNMP Data
  stack                    stack related info
  statistics               Clear Statistics
  stp-protect-statistics   Clear stp-protect BPDU drop counter
  sysmon                   Clear sysmon related counters
  vsrp-aware               Clear learnt vsrp aware entries
  web-connection           All web connections
  webauth                  Web Authentication
Brocade Moderator
Posts: 100
Registered: ‎02-04-2015

Re: Clear Crash Dump Info

Hi NETWizz,

 

Got the 6540 confused with 6740, i'm afraid. Apologies for that.

 

There is no direct command to clear the crash info on the ICX platform including 6540. You may want to try and collect a support save to a server and see if this helps clearing the old data.

 

Regards,

Os

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers.

All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution" .
Frequent Contributor
Posts: 124
Registered: ‎07-20-2015

Re: Clear Crash Dump Info

Thanks...  It is merely cosmetic.  Thank you

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.