Ethernet Switches & Routers

Reply
Occasional Contributor
Posts: 5
Registered: ‎11-28-2011

Can not trace the serial vias SNMP on MLX

Hi,

I can not go back the chassis serial vias SNMP, I go all fields SNMP with "snmpwalk" under linux but none contains the chassis serial.

Is there something to activate to the MLX to be able to get the serial in SNMP?

Regards

Super Contributor
Posts: 1,087
Registered: ‎12-13-2009

Re: Can not trace the serial vias SNMP on MLX

Hi mmatthey,

Think this is the one you are after.

Chassis table

brcdIp.1.1.1.4.1.1.2

Syntax: DisplayString

Read only The serial number of the unit. If the serial number is unknown or

unavailable, then the value should be a zero length string There can be

up to 128 characters for the serial number.

OR

snChasFactorySerialNumber

brcdIp.1.1.1.1.29

Syntax: DisplayString

Read only

Distributor serial number

NOTE: This object is supported only on Brocade MLXe and NetIron

devices running software release 05.1.00 and later.

Thanks

Michael.

Occasional Contributor
Posts: 5
Registered: ‎11-28-2011

Re: Can not trace the serial vias SNMP on MLX

Hi,

I finally found it is the nonstandard OID:  
.1.3.6.1.4.1.1991.1.1.1.1.29.0?

PS: I have a MLXe-8 with the Version "5.2.0T165 Copyright (c) 1996-2009 Brocade Communications Systems, Inc.
Compiled on Jun  7 2011 at 17:06:32 labeled as xmprm05200"

Regards

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook