Ethernet Switches & Routers

Reply
Occasional Contributor
Posts: 6
Registered: ‎04-19-2012

Brocade FWS 624G-POE

hi

I have FWS624G-POE switch. does it have a default IP. If not, then do how do i use telnet to configure in the IP

thanks

RGod

Super Contributor
Posts: 1,087
Registered: ‎12-13-2009

Re: Brocade FWS 624G-POE

Hi RGod,

    You assign the ip address via the serial port on the first then enable telnet or SSH (recommend you use SSH).

Below are the instruction for setting the management IP on a Layer 2 switch

To assign an IP address to a Brocade Layer 2 Switch, enter a
command such as the following at the global CONFIG level.

    

Brocade(config)# ip address 192.45.6.110 255.255.255.0

   

Syntax: ip address <ip-addr> <ip-mask>

   Or

    

Syntax: ip address <ip-addr>/<mask-bits>

You also can enter the IP address and mask in CIDR format, as follows.

    

Brocade(config)# ip address 192.45.6.1/24

    

To specify the Layer 2 Switch default gateway, enter a command such as the following.

    

Brocade(config)# ip default-gateway 192.45.6.1 255.255.255.0

Thanks

Michael.

Occasional Contributor
Posts: 6
Registered: ‎04-19-2012

Re: Brocade FWS 624G-POE

HI Michael,

Thank you i have done that. now what is is the sytax for creating username and password?

thanks

Super Contributor
Posts: 1,087
Registered: ‎12-13-2009

Re: Brocade FWS 624G-POE


Hi RGodfey,

  Local usernames? if so then;

from the Config level.

username somethink password mypassword

aaa authentication snmp-server default local

aaa authentication web-server default local

aaa authentication login default local

write mem

Thanks

Michael.

Occasional Contributor
Posts: 6
Registered: ‎04-19-2012

Re: Brocade FWS 624G-POE

HI Michael, I have set all the ip and passwords. The Switch in FWS624GPOE, how can i activate the Port to use as POE since it a POE switch. Help

Thanks

RGodfrey

Occasional Contributor
Posts: 18
Registered: ‎04-20-2010

Re: Brocade FWS 624G-POE

you can go under the port and configure inline power

exit

wr mem

or you can globally enable inline power on the interface range.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook