Ethernet Switches & Routers

Reply
New Contributor
Posts: 2
Registered: ‎07-28-2014

Brocade 6910 Verifying Checksum ... Bad Data CRC [Error] No valid runtime image(s) to boot.

Hello all:

 

We have approximately 35-30 Brocade 6910's deployed throughout our network.  We recently took a power outage at one location and we were unable to re-gain access to the onsite 6910 after power was restored.  I logged into the switch via the console and I'm getting the following:

 

Loading Runtime Image File : runtime1.bix
Image version: 2.0.2.7
   Verifying Checksum ... Bad Data CRC

The startup runtime image runtime1.bix is not valid. Delete the invalid one.

Loading runtime image from 0xF8300000
Image version: 2.0.2.7
   Verifying Checksum ... Bad Data CRC

[Error] No valid runtime image(s) to boot.

Trying to download the runtime image from a TFTP server or Modem...

The trouble is, I can not find out how to configure the network and TFTP server at this level of the boot sequence in the 6910.  I beleive in some of the FastIron gear, you can press 'd' to access configs to setup on IP and TFTP server for the Mgmt interface.  I find no documentaion on how to even utilize the Mgmt interface for the 6910. 

 

Can someone shine some light on how to address/fix this problem?

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook