Ethernet Switches & Routers

Reply
Occasional Contributor
Posts: 6
Registered: ‎04-14-2010

Booting secondary flash

Hi,

We have Foundry Fastlron GS 648P - POE. What is the command to change the default booting to secondary flash? I tried 'boot system flash secondary' command but when the power is off it goes back to primary flash.

Regards,

Liju

Super Contributor
Posts: 1,087
Registered: ‎12-13-2009

Re: Booting secondary flash

Hi liju.thomas,

      The command 'boot system flash secondary' from the enable prompt will cause the unit to reboot into the sec flash.

     The same command from the config term prompt (with a write mem)  will make it do it all the time.

Thanks

Michael.

Super Contributor
Posts: 1,087
Registered: ‎12-13-2009

Re: Booting secondary flash

Hi,

     You may wish to read http://community.brocade.com/docs/DOC-1842 for more info as well.

Thanks

Michael.

Occasional Contributor
Posts: 6
Registered: ‎04-14-2010

Re: Booting secondary flash

Thank you Michael!

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

Click to Register
Download FREE NVMe eBook