Ethernet Fabric (VDX, CNA)

Reply
New Contributor
Posts: 2
Registered: ‎09-08-2016
Accepted Solution

arp conflict

Hi everyone,

 

i have problem on our device. below there're two different mac-address :

 

R1SW-VDX6740-RB11# show arp rbridge-id all | in 172.16.69.58
172.16.69.58 000c.291f.7c56 Ve 97 yes 00:00:05 Dynamic
172.16.69.58 0cc4.7ac4.c5b4 Ve 97 no 7w0d03h Dynamic

 

 

R1SW-VDX6740-RB11# show arp rbridge-id all | in 172.16.69.58
172.16.69.58 0cc4.7ac4.c5b4 Ve 97 no 7w0d03h Dynamic

 

after clear arp & shuftdown interface to host, but still there. could you give me a recommendation for this case?

 

Regards,

Rohmat

 

Brocade Moderator
Posts: 237
Registered: ‎06-30-2010

Re: arp conflict

Hi Rohmat,

 

When you clear the ARP entries do you use the command clear arp no-refresh if not I would suggest that you try again using this command

 

Hope this helps

 

Regards

Mick


If my response has solved your query please click the "Accept as Solution" button.

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers.

All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider.
New Contributor
Posts: 2
Registered: ‎09-08-2016

Re: arp conflict

Hi Mick,

 

problem is solved now, many thanks for your suggestion. :)

 

Regards,

Rohmat

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

Click to Register
Download FREE NVMe eBook