01-26-2016 10:37 AM
I have a problem setting the IP address for a port to run at 100Mb.
VDX6740# config t
Entering configuration mode terminal
VDX6740(config)# int te 1/0/6
VDX6740(conf-if-te-1/0/6)# speed 100
VDX6740(conf-if-te-1/0/6)# ip address 192.168.111.45/24
%%Error: Configuration not allowed when link speed set to 100Mbps.
I can get a link at 100M within L2 mode but not able to configure port speed to 100Mb and set ip address for it.
Any help would be greatly appreciated. Thank you.
Solved! Go to Solution.