Ethernet Fabric (VDX, CNA)

Reply
Contributor
Posts: 22
Registered: ‎08-16-2005
Accepted Solution

VDX 6740 : snmp monitor Temp and Power

Hi,

 

we want to monitor (using nagios and rrd) the temperature and the power of our fabric (4 VDX 6740).

2 problems - I can not find the correct OID.  snmpwalk is also not working correctly. It dies after 1-2min without

finishing ...

 

Any help or example ?

 

Bye, Peer

Contributor
Posts: 59
Registered: ‎02-25-2016

Re: VDX 6740 : snmp monitor Temp and Power

The optic values are a little bit hidden.

snmpwalk -v 2c -c $COMMUNITY $DEVICE_IP .1.3.6.1.4.1.1991

will produce results e.g.:

iso.3.6.1.4.1.1991.1.1.3.3.10.1.3.402751490.1 = STRING: "620.5 uWatts Normal"
iso.3.6.1.4.1.1991.1.1.3.3.10.1.5.402751490.1 = STRING: "6.990 mAmps Normal"
Regards
Jörg Kost
Contributor
Posts: 22
Registered: ‎08-16-2005

Re: VDX 6740 : snmp monitor Temp and Power

Hi,

 

thanks, it works, but it won't mach with the cli:

SNMPv2-SMI::enterprises.1991.1.1.3.3.10.1.2.201736384.1 = STRING: "31 C Normal"
SNMPv2-SMI::enterprises.1991.1.1.3.3.10.1.2.201736384.2 = STRING: "31 C Normal"
SNMPv2-SMI::enterprises.1991.1.1.3.3.10.1.2.201736384.3 = STRING: "31 C Normal"
SNMPv2-SMI::enterprises.1991.1.1.3.3.10.1.2.201736384.4 = STRING: "31 C Normal"
SNMPv2-SMI::enterprises.1991.1.1.3.3.10.1.2.201744576.1 = STRING: "29 C Normal"
SNMPv2-SMI::enterprises.1991.1.1.3.3.10.1.2.201744576.2 = STRING: "29 C Normal"
SNMPv2-SMI::enterprises.1991.1.1.3.3.10.1.2.201744576.3 = STRING: "29 C Normal"
SNMPv2-SMI::enterprises.1991.1.1.3.3.10.1.2.201744576.4 = STRING: "29 C Normal"

 

on the cli

show environment temp
Rbridge-id:
Sensor    State        Centigrade     Fahrenheit
  ID
=================================================
  1    Ok                   28           82
  2    Ok                   45          113
  3    Ok                   29           84
  4    Ok                   45          113

 

So what is displayed ?

 

(the power for each port might be correct...)

Contributor
Posts: 59
Registered: ‎02-25-2016

Re: VDX 6740 : snmp monitor Temp and Power

show media

 

will show you the optical values on the CLI. 

 

show environment

is for other hardware values / sensors. 

Regards
Jörg Kost
Contributor
Posts: 59
Registered: ‎02-25-2016

Re: VDX 6740 : snmp monitor Temp and Power

[ Edited ]

Ah well, I misunderstand. 

 

The chassis values can be found under

 

.1.3.6.1.4.1.1588.2.1.1.1.1.22.1

 

The other OID that I have posted earlier, will give you the optic values.

Regards
Jörg Kost
Contributor
Posts: 22
Registered: ‎08-16-2005

Re: VDX 6740 : snmp monitor Temp and Power

Does not work. I get
SNMPv2-SMI::enterprises.1588.2.1.1.1.1.22.1 = No Such Object available on this agent at this OID

Currently we are using NOS 7.0.1 , but we will
soon go back to 6.0.2b (software bug in 7.0.1)
Contributor
Posts: 59
Registered: ‎02-25-2016

Re: VDX 6740 : snmp monitor Temp and Power

What is your exact VDX6740 model?

Regards
Jörg Kost
Contributor
Posts: 22
Registered: ‎08-16-2005

Re: VDX 6740 : snmp monitor Temp and Power

Chassis Name: BR-VDX6740
switchType: 131

I also added a dedicated view:
snmp-server view all 1 included


Contributor
Posts: 22
Registered: ‎08-16-2005

Re: VDX 6740 : snmp monitor Temp and Power

snmpwalk .... .1.3.6.1.4.1.1588 works,
but here are no temperature values
Contributor
Posts: 59
Registered: ‎02-25-2016

Re: VDX 6740 : snmp monitor Temp and Power

Here is my output of type 131 with some comments, what is yours?

 

snmpwalk -v2c -c public 192.168.1.74 .1.3.6.1.4.1.1588.2.1.1.1.1.22.1
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.1 = INTEGER: 1
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.2 = INTEGER: 2
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.3 = INTEGER: 3
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.4 = INTEGER: 4
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.5 = INTEGER: 5
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.6 = INTEGER: 6
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.7 = INTEGER: 7
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.1.8 = INTEGER: 8
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.1 = INTEGER: 1
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.2 = INTEGER: 1
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.3 = INTEGER: 1
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.4 = INTEGER: 1
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.5 = INTEGER: 2
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.6 = INTEGER: 2
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.7 = INTEGER: 3
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.2.8 = INTEGER: 3
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.1 = INTEGER: 4
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.2 = INTEGER: 4
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.3 = INTEGER: 4
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.4 = INTEGER: 4
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.5 = INTEGER: 4
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.6 = INTEGER: 4
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.7 = INTEGER: 2
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.3.8 = INTEGER: 4

# Temperature SLOT #0, Temp #1
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.1 = INTEGER: 31
# Temperature SLOT #0, Temp #2
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.2 = INTEGER: 36
# Temperature SLOT #0, Temp #3
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.3 = INTEGER: 28
# Temperature SLOT #0, Temp #4
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.4 = INTEGER: 32
# Fan #1 cycles
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.5 = INTEGER: 2937
# Fan #2 cycles
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.6 = INTEGER: 2963
# Power supply 1 faulty
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.7 = INTEGER: 0
# Power supply 2 fine
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.4.8 = INTEGER: 1
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.1 = STRING: "SLOT #0: TEMP #1"
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.2 = STRING: "SLOT #0: TEMP #2"
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.3 = STRING: "SLOT #0: TEMP #3"
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.4 = STRING: "SLOT #0: TEMP #4"
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.5 = STRING: " FAN #1"
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.6 = STRING: " FAN #2"
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.7 = STRING: " Power Supply #1"
iso.3.6.1.4.1.1588.2.1.1.1.1.22.1.5.8 = STRING: " Power Supply #2"

 

 

Regards
Jörg Kost

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.