Ethernet Fabric (VDX, CNA)

Reply
Occasional Contributor
Posts: 18
Registered: ‎08-28-2016

Now i use logical chassis and get some trouble: ip route table not update

......# sh vcs
Config Mode    : Distributed
VCS Mode       : Logical Chassis

............# sh ver

Network Operating System Software
Network Operating System Version: 6.0.2
Copyright (c) 1995-2015 Brocade Communications Systems, Inc.
Firmware name:      6.0.2a2

 

.........# sh ip route rb 100

        140.96.192.0/22    140.96.253.126  Ve 1126        1/1

.........# sh ip route rb 10

        140.96.192.0/22    140.96.254.108  Ve 10          1/1

 

but when i inspect 

....# show rbridge-local-running-config  rb 10

    ip route 140.96.192.0/22 140.96.253.126

 

Told how can i modify that routing table

 

 

 

 

 

 

 

 

Brocade Moderator
Posts: 102
Registered: ‎02-04-2015

Re: Now i use logical chassis and get some trouble: ip route table not update

Hello,

 

Did you check if you could ping 140.96.253.126 from RB10, and it is popualted in the ARP table?

 

Thanks

Os

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers.

All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution" .
Highlighted
Occasional Contributor
Posts: 18
Registered: ‎08-28-2016

Re: Now i use logical chassis and get some trouble: ip route table not update

How to use rb10 ping destination target
Brocade Moderator
Posts: 102
Registered: ‎02-04-2015

Re: Now i use logical chassis and get some trouble: ip route table not update

Hello,

 

You need to be on RB 10 to test reachability to 140.96.253.126.

 

Meanwhile, you can check if the VE interface on RB10 is up, and if IP 140.96.253.126 is in RB10 ARP table

 

show ip interface ve 1126 rbridge-id 10

show arp ip 140.96.253.126 vrf default rbridge-id 10

 

Thanks

Os

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers.

All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution" .

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

Click to Register
Download FREE NVMe eBook