Ethernet Fabric (VDX, CNA)

Reply
Occasional Contributor
Posts: 8
Registered: ‎01-28-2016
Accepted Solution

Interface not configured for switching

Trying to add an interface to a vlan but keep getting the following errors.  Brocade OS Administration Guide is not helping and was hopeing someone in the community could help.

 

VDX02(config)# interface TenGigabitEthernet 1/0/27 
VDX02(conf-if-te-1/0/27)# switchport access vlan 99
%%Error: Interface not configured for switching

VDX02(config-rbridge-id-1)# interface TenGigabitEthernet 1/0/27
VDX02(conf-if-te-1/0/27)# switchport mode access
%%Error: Interface not configured for switching

 

 

thanks in advance

Contributor
Posts: 29
Registered: ‎12-02-2015

Re: Interface not configured for switching


MCASA wrote:

Trying to add an interface to a vlan but keep getting the following errors.  Brocade OS Administration Guide is not helping and was hopeing someone in the community could help.

 

VDX02(config)# interface TenGigabitEthernet 1/0/27 
VDX02(conf-if-te-1/0/27)# switchport access vlan 99
%%Error: Interface not configured for switching

VDX02(config-rbridge-id-1)# interface TenGigabitEthernet 1/0/27
VDX02(conf-if-te-1/0/27)# switchport mode access
%%Error: Interface not configured for switching

Hey,

 

You need to put the interface into switchport mode first:

 

VDX02(config)# interface TenGigabitEthernet 1/0/27 
VDX02(conf-if-te-1/0/27)# switchport
Occasional Contributor
Posts: 8
Registered: ‎01-28-2016

Re: Interface not configured for switching

nov1c3, 

 

Thanks again. this is the second time you've helped me out of a jam. 

 

Much Mahalos!

Contributor
Posts: 29
Registered: ‎12-02-2015

Re: Interface not configured for switching

Welcome. You're following my learning curve. The next question would probably be related to port aggregation. Smiley Happy

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.