08-23-2016 06:20 AM
Now,I will try to use "Mellanox QSFP to SFP+ cable adapter" to VDX6740T.
And I trying to use SFP+(10Gbase-LR).
So,I would like to ask you the following questions;
・What are the commands needed to implement?
・LAG and VRRF to implemet?
・Need to the 10G license?
08-23-2016 07:17 AM
not sure what youmeaning with:
->Now,I will try to use "Mellanox QSFP
do you want to use Mellanox QSFP in Brocade VDX ?
generally, Brocade Switches require and Support only Genuine Brocade Optics
08-24-2016 06:17 AM
thank you reply.
>do you want to use Mellanox QSFP in Brocade VDX ?
If want to implement the SFP+(LR) to VDX6740T, QSFP has recognized that it is necessary.
Recognition is wrong?
08-24-2016 02:48 PM
The Mellanox QSA can be used in the VDX with NOS versions greater than 5.0. (IIRC) You will need to set the 40GbE port to breakout using the following
switch(config-hardware)# connector 2/0/1
switch(config-connector-2/0/1)# sfp breakout
Depending on the version of NOS you are running you may need to save the config and then reload the VDX for the breakout to take effect. Dynamic breakout (no reload) was introduced in NOS6.0.