Ethernet Fabric (VDX, CNA)

Reply
Highlighted
Senior Member
Posts: 1
Registered: ‎06-16-2016

Enabling SNMPv3 on EN4023(vdx2740) devices on FLEX

Most of the commands in the SNMP part that work on standard VDX switches do not work on vdx2740 platform.

Parameters for SNMPv3 that we are trying to configure:
  User Name: test
  Security Level: AuthNoPriv
  Hashing: MD5
  Access to all OID Read, Write, Notify

 

In General, according to Command Reference in the description of the command "snmp-server user" is such a proposal "For the Brocade VDX 2740 and Brocade VDX 2746, only the default group names (snmpadmin and snmpuser) are supported".

 

But when I try to create a group

(config)# snmp-server group snmpadmin v3 auth read All write All notify All
This command is not supported for this platform.

The config of snmp:

# sh run snmp
snmp-server contact "***"
snmp-server location ****
snmp-server sys-descr "FLEX"
snmp-server enable trap
snmp-server community **filtered** groupname user
snmp-server host Y.Y.Y.Y **filtered**
 use-vrf mgmt-vrf
!
snmp-server user snmpadmin1 groupname snmpadmin auth sha auth-password "JyAcrypJDtP969ZrZ3G0y0ixFDQ=\n" priv DES priv-password "JyAcrypJDtP969ZrZ3G0y0ixFDQ=\n" encrypted
snmp-server user snmpadmin2 groupname snmpadmin auth sha auth-password "6xMlYUY/NlYdUIlqPS6sP7Jl5Qg=\n" priv DES priv-password "6xMlYUY/NlYdUIlqPS6sP7Jl5Qg=\n" encrypted
snmp-server user snmpadmin3 groupname snmpadmin auth sha auth-password "Xr1lVkV/Svvm7l/y4TNfj2aFOp4=\n" priv DES priv-password "Xr1lVkV/Svvm7l/y4TNfj2aFOp4=\n" encrypted
snmp-server user snmpuser1 groupname snmpuser auth sha auth-password "GhYYkGjzuQRqQ3j61Q7PeScrXV4=\n" priv DES priv-password "GhYYkGjzuQRqQ3j61Q7PeScrXV4=\n" encrypted
snmp-server user snmpuser2 groupname snmpuser auth sha auth-password "c1dPQ1Lj9PaOjkisKl46ov7sJL8=\n" priv DES priv-password "c1dPQ1Lj9PaOjkisKl46ov7sJL8=\n" encrypted
snmp-server user snmpuser3 groupname snmpuser auth sha auth-password "JY6UNutHcB1YskPOGclh05B/tOw=\n" priv DES priv-password "JY6UNutHcB1YskPOGclh05B/tOw=\n" encrypted
snmp-server view All 1 included
snmp-server group admin v1 read All write All notify All
snmp-server group admin v2c read All write All notify All
snmp-server group snmpadmin v3 notify All
snmp-server group snmpuser v3 notify All
snmp-server group user v1 read All notify All
snmp-server group user v2c read All notify All

 

Please help to solve this problem. It is possible to configure SNMPv3 user on vdx2740?

 

 

 

 

 

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook