07-05-2010 05:54 AM
I have a Nexus 5000 running in NPV mode connected to a Brocade 5100 FC switch using two FC ports on a native FC module in the Nexus 5000. I would like to configure these two physical links as one logical link using a SAN Port-Channel/ISL-Trunk. An ISL trunking license is already installed on the Brocade 5100. Does anybody know how to configure this on the Nexus and Brocade side?
Thank you in advance for any comments.
07-05-2010 09:36 AM
Thank you for the provided link but I already read this mentioned thread.
The problem is that nothing is said about the required configuration settings on the Brocade 5100 switch for setting up a SAN Port-Channel.
07-05-2010 09:52 AM
Is descripted in the How-to-Guide
If you are satisfied with the responses please mark as 'Answered'.
If not, just let me know I can see to get more info.
I would appreciated if you rate the threads.
04-18-2011 07:30 AM
Can You confirm, that it is possible to connect Brocade 5100 (FOS 6.2 or above) with Nexus 5020? On cisco.com i found only this document: http://www.cisco.com/en/US/docs/switches/datacenter/mds9000/interoperability/matrix/Matrix5.html but this concern only Cisco MDS 9000... :/
04-18-2011 08:51 AM
I have a Official How-To Guide from EMC Inside Csco and Brocade Engineerig , I'll Upload here ASAP!
The only one, I'm at the moment not 100% sure which exact FOS and SAN / NX-OS is supported or not.