Ethernet Fabric (VDX, CNA)

Reply
New Member
Posts: 1
Registered: ‎01-20-2016

Brocade VDX no OSLoader on printenv. switch not booting kernel image

hi, below is the result of printenv from our Brocade VDX 6740. there is no OSLoader setting. could this be the reason why we get the ERROR: can't get kernel image? we recently had a power trip in our office and since then, the switch is not booting up properly. please help. thank u!

=> printenv
AutoLoad=yes
LoadIdentifiers=Fabric Operating System;Fabric Operating System
OSLoadOptions=quiet
OSRootPartition=sda2;sda1
SkipWatchdog=yes
bootargs=root=/dev/sda$prt rootfstype=ext4 quiet
bootcmd=execute_internal_bootcmd
bootdelay=5
devinit=usb reset 0
devname=sda
eth3addr=50:EB:1A:AC:41:00
eth4addr=50:EB:1A:AC:41:01
ethact=FM1@DTSEC4
ethaddr=50:EB:1A:AC:41:00
fastboot=false
filesize=9E
gatewayip=10.44.130.254
gosaddr=0x78000000
goscmd=ext2load usb 0:$prt $gosaddr boot/zImage.tree.initrd
hv_bootargs=config-addr=0x3000000
hvcmd=makesinrec 0x79fff000;ext2load usb 0:$prt 0x4000000 boot/silkworm.dtb;ext2load usb 0000
hvcmd_fast=makesinrec 0x79fff000;ext2load usb 0:$prt 1000 /boot/fastloading.mdt;usb fastlo
ipaddr=10.44.130.175
linux_bootcmd=makesinrec 0x01000000;ext2load usb 0:$prt 0x4000000 boot/silkworm.dtb;ext2lo
netmask=255.255.255.0
prt=2
recovery_bootcmd=tftp 0x5000000 HiBootWdCntRecover_mm.scr;source 0x5000000
serverip=

Environment size: 1148/2000 bytes at 0x7fe1f818
loaded from persistent bootenv for GOS 0 at 0xed000800

 

 

 

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook