11-16-2015 04:50 AM
I'm working on a solution that has many HP servers with 2x 1860-2p PCI adapters. I need to enable BIOS on 1st port of the second adapter in order to PXE-boot. We can do it manually from Alt-B prompt but this is a big problem because we have tens of servers to configure.
I tried bcu util (bfa_util_linux_noioctl-126.96.36.199_ga-0.noarch.rpm) on my RHEL 6.5 diskless image but I get this error message everytime I run it:
./bcu ethboot --query 2/0 ERROR: port id "2/0" in command is incorrect ./bcu ethboot --enable 2/0 ERROR: port id "2/0" in command is incorrect
modinfo bna filename: /lib/modules/2.6.32-431.el6.x86_64/kernel/drivers/net/bna/bna.ko firmware: ct2fw-188.8.131.52.bin firmware: ctfw-184.108.40.206.bin version: 220.127.116.11r description: Brocade 10G PCIe Ethernet driver license: GPL author: Brocade srcversion: 35CB2126D33EBC4DECA5936 alias: pci:v00001657d00000022sv*sd*bc02sc00i* alias: pci:v00001657d00000014sv*sd*bc02sc00i* depends: vermagic: 2.6.32-431.el6.x86_64 SMP mod_unload modversions parm: bnad_msix_disable:Disable MSIX mode (uint) parm: bnad_ioc_auto_recover:Enable / Disable auto recovery (uint) parm: bna_debugfs_enable:Enables debugfs feature, default=1, Range[false:0|true:1] (uint)
11-16-2015 05:06 AM
Brocade HBA as be acquired by QLOGIC and are no longer supported by Brocade.
In any case, in order to configure PXE, - as fair as i remember - you can do that with the unified RHEL DUD drivers, however is unknow to if such a package is available for 6.5, I know only the DUD 5.7
would suggest to ask by QLOGIC for such a package or if 5.7 is compatible and supported