For more details, please see ourCookie Policy.

Application Delivery (ADX)

Not applicable
Posts: 1
Registered: ‎04-05-2012

Serveriron 4G SSL


How can I upgrade SW: Version 10.2.01u to SW: Version 10.2.01y using cli method. We are having issues with SSL/TLS with chrome and I find out if I upgrade it to 10.2.01y it will resolved the issue. I need to know the steps how to perform this upgrade. Thanks in advance.

SLB1#sh ver
  SW: Version 10.2.01uTI4 Copyright (c) 1996-2007 Foundry Networks, Inc.
      Compiled on Apr 08 2011 at 13:32:29 labeled as WJR10201u
  HW: Stackable Router, SYSIF version 21, Serial #: Non-exist
    ServerIron 4G SSL, SYSIF 2 (Mini GBIC)
      Serial #: 
    0 MB SHM, 1 Application Processors
4096 KB BRAM, JetCore ASIC IGC version 49
  SW: (1)10.2.01uTJ3
32768 KB PRAM and 2M-Bit*1 CAM for IGC  0, version 0449
  1.0 GHz Power PC processor 750GX (version 7002/0112) 66 MHz bus
  512 KB boot flash memory
16384 KB code flash memory
  512 KB SRAM
  512 MB DRAM
The system uptime is 221 days 2 hours 47 minutes 56 seconds
The system started at 11:40:38 Eastern Sun Aug 28 2011

The system : started=cold start

Posts: 70
Registered: ‎03-14-2009

Re: Serveriron 4G SSL

Hi Syed,

you have to upload a MP and a BP image to the flash.

MP: copy tftp flash <TFTP IP> image.bin <pri|sec>

BP wsm copy flash <TFTP IP> image.bin <pri|sec>

Check the latest 10.2.01Release Notes for the correct image depending the Hardware you are using (SSL/PREM).

Join the Broadcom Community

Get quick and easy access to valuable resources across the Broadcom Community Network.