Application Delivery (ADX)

Reply
Occasional Contributor
Posts: 17
Registered: ‎11-10-2010

Remote-Cache doesn't work

Dear All,

I already realized that remote-cache I configured doesn't work whatever I put "remote-cache" command in cache-name. I configured a cache server's gateway to the Layer3 switch and used /30 for connection between L3 and ServerIron. I checked every basic connection and all of them can ping eachother.

When I used command "show cache-group" on the ServerIron I found result like below:

show_cache-group.bmp

The result above shows connection client-to-cache only -- no cache-to-client, no webserver-to-cache, no cache-to-webserver. I reay don't know how to make it work. Please give me your advice.

Lab diagram

diagram.JPG

ServerIron Configuration

...

server port 80
tcp
tcp l4-check-only
!
server cache-name cs1 10.10.10.11
remote-cache
port http
port http url "HEAD /"
!
server cache-group 1                                             
cache-name cs1

!

vlan 1 name DEFAULT-VLAN by port
!
ip l4-policy 1 cache tcp http global
ip route 0.0.0.0 0.0.0.0 100.0.1.1

...

By the way, I attached full configurations for L3 swithc (FCX), ServerIron (ADX1000) and Diagram in this.

Best Regards,

Tony

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook