Application Delivery (ADX)

Reply
Contributor
Posts: 35
Registered: ‎05-04-2009

Monitor/Pools/Lb method - porting F5 to Brocade

I am working on a SI implementation that is a competitive takeover of a 5 year  old F5 environment as mentioned in an earlier post. I am not a ServerIron specialist and I need some help to convert the following parts of the configuration:

monitor ihavechangedthis-8001 {

    defaults from https

    timeout 11

    dest *:8001

    recv "OK"

    send "GET /health/db"

}

node a.b.c.141 {

    screen ihavechangedthis-ssl01

}

node a.b.c.142 {

    screen ihavechangedthis-ssl02

}

pool ihavechangedthis_ssl {

   lb  method least conn

    monitor all ihavechangedthis-8001

    member a.b.c.141:8001

    member a.b.c.142:8001

}

virtual ssl.ihavechangedthis.com {

    destination a.b.c.d:https

   ip  protocol tcp

    pool ihavechangedthis_ssl

}

Anyone able to convert this quickly?

Super Contributor
Posts: 316
Registered: ‎05-01-2009

Re: Monitor/Pools/Lb method - porting F5 to Brocade

A quick try with some comments:

No server use-simple-ssl-healthcheck       <<<<<<<<<< please do a full (content) SSL health  check

Server port ssl                                          <<<<<<<<<< I would like to use port ssl (443)

  Tcp

Server port 8001                                        <<<<<<<<<< the backend port I am using is 8001  which is as wel TCP and please sync it

  Session-sync

  Tcp

server port-policy 8001                             <<<<<<<<<< this is like the monitor – please check url “/health/db” using protocol ssl and do a content  match

  protocol ssl

  protocol ssl url "GET /health/db"

  protocol ssl content-match WAIT-FOR-OK

Server real ihavechangedthis-ssl01 a.b.c.141               <<<<<<<<<<<< node #1

  Port default dis

  port 8001

  port 8001 use-port-policy 8001                 <<<<<<<<<<<< getting checked with the health  check created above

Server real ihavechangedthis-ssl02 10.1.8.142               <<<<<<<<<<<< node #1

  Port default dis

  port 8001

  port 8001 use-port-policy 8001                 <<<<<<<<<<<< getting checked with the health  check created above

Server virtual ssl.ihavechangedthis.com a.b.c.d  <<<<<<<<<<< create the virtual server with the  IP given

  Predictor least-conn                                 <<<<<<<<<<< load balancing  algorithm

  Port 443                                                  <<<<<<<<<<< please offer the following port to  the outside world

  Bind 443 ihavechangedthis-ssl01 8001 ihavechangedthis-ssl02 8001 <<<<<<<<<<< please some reals with their  service ports behind the offerend port (instead of using pool which are getting  bound to the virtual server)

http content-match WAIT-FOR-OK              <<<<<<<<<<< do a content match was mentioned  above – the result might be OK which is fine if not: server  down

  up simple “OK”

  default down

Please ignore all formatting issues - I am in a hurry.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.

vADC is now Pulse Secure
Download FREE NVMe eBook