04-05-2016 03:38 AM
Hi, we are using Brocade ADX 1000, I just upgrade the firmware and now not able to login through web. It didn authanticate any local user. we are able to connect through telnet/serial. I create a new user user with super user right, but still not able to login through web.
users related configurations are as:
aaa authentication web-server default local
boot sys fl sec
enable telnet password .....
no enable aaa console
username admin password .....
username ps password .....
no snmp-server enable traps locked-addr
04-08-2016 10:43 PM
-->>I just upgrade the firmware and now not able to login through web.
most probable, you set by Upgrade to boot from the Slot with NEW Firmware, where is no config.
#copy running-config slot_number|Number
in example, if the running config is saved in slot1 you must copy to slot2
#copy running-config slot1|2
viceversa slot 2 to slot 1
#copy running-config slot2|1
save th econfig with command
now all config are present in both Slot Primary/Secondary
if th eproblem persist, please post SNMP config here