After updating a certificate on an LKM I've been able to register one of two BES. However, one of the BES ( the group leader ) never "accepted" the package from the LKM. So after deregistering the…

We have a MCdata 2640 san router.  I would like to attach two storage ports (for replication purpose) to the same MP2640.  I just wondering is it possible for me to create a local zoning with this…

Hi,   The FOS is 6.4.1a. The strange thing is that in our dual-fabric SAN configuration I have 2 identical switches (each on a separate fabric): one that gives that error messages and another that…

Hi, Many thanks for your help and clearing my doubts!!!!!!!!!!!!!!!!!!!!!!!!!

Hi Sebastian,   thanks. Checked in my LAB and i can see the parameter if it is not the default value. Regards Ralf

An alias is just a little helper to organize your zoning. So IMHO there is no technical difference between having 2 aliases with 1 address each or 1 alias with 2 addresses. The aliases are resolved…

Do you really got the point that it's just the firmware of the switches and not an OS on the hosts actually doing I/O against storage subsystems?   If you are aware of that and really write a…

This helps a lot for my understanding. Thanks a lot!

Hi,   When you get the results back and xls workbook is attached. On the "introduction" tab there's a legend for the colors meaning. There's link as well to the sanhealth page with instruction…

Yep that's normal behavior and your guess is right, it has been removed from FOS, However you can still zone using webtools and cli to add remotre wwn's. If you want that functionality back, please…

Can anybody share Technical comparison between Cisco MDS 9148 and Brocade 5140 ?

Dear Antonio,   Thanks a lot for your help.

Anyone know what OID to use to monitor the bandwidth (in/out) of a multi-port trunk or link-aggregate?   We have 4 ports in a trunk and are trying to see how much traffic they are seeing in one…