Sofware-Defined Networking

Reply
Occasional Contributor
Posts: 8
Registered: ‎10-14-2014

Failure installing Vyatta Controller 1.3.0

Hi,

I'm getting the following error when trying to install the controller on a clean Ubuntu 14.04 LTS Server.

 

From the install log:

root@vcontroller:/opt/bvc# cat log/install_log
Installer arguments: Namespace(i=False, j=None, n=None, s=None, zipfiles=[])
Brocade Vyatta Controller Installation

Starting @ : 2015-05-07 08:25:16.001705

Performing prerequisite check ...
JDK Check ................................ [ OK ]
Running Command ['/sbin/ip', 'route', 'show']
default via 192.168.5.2 dev eth0

default via 192.168.5.2 dev eth0

192.168.5.0/24 dev eth0 proto kernel scope link src 192.168.5.130

192.168.5.0/24 dev eth0 proto kernel scope link src 192.168.5.130

192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1

192.168.122.0/24 dev virbr0 proto kernel scope link src 192.168.122.1

Running Command ['/sbin/ip', 'addr', 'show', 'dev', 'eth0']
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000

2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000

link/ether 00:0c:29:da:df:bb brd ff:ff:ff:ff:ff:ff

link/ether 00:0c:29:da:df:bb brd ff:ff:ff:ff:ff:ff

inet 192.168.5.130/24 brd 192.168.5.255 scope global eth0

inet 192.168.5.130/24 brd 192.168.5.255 scope global eth0

valid_lft forever preferred_lft forever

valid_lft forever preferred_lft forever

inet6 fe80::20c:29ff:feda:dfbb/64 scope link

inet6 fe80::20c:29ff:feda:dfbb/64 scope link

valid_lft forever preferred_lft forever

valid_lft forever preferred_lft forever


Your systems CPU count is 2, recommended is 4 or more to ensure acceptable performance.

CPU Count Check: ......................... [ OK ]
Memory Size Check: ....................... [ OK ]
Running Command ['node', '--version']
v0.10.38

v0.10.38


Running pre-install scripts ...

Unpacking archives ....................... [ OK ]

Setting up karaf container ............... [ OK ]

Running controller pre-install scripts ...
Running custom install script: com.brocade.bvc.app-bvc-app-pathexplorer-packaging.preinstall
Running Command ['./com.brocade.bvc.app-bvc-app-pathexplorer-packaging.preinstall']

Custom install script complete with code: 0
**********Standard Output*******
[]
********************************

Running custom install script: com.brocade.bvc-bvc-core-bvc-controller.preinstall
Running Command ['./com.brocade.bvc-bvc-core-bvc-controller.preinstall']

Custom install script complete with code: 0
**********Standard Output*******
[]
********************************


Configuring base features ................ [ OK ]
Running Command ['fuser', '/opt/bvc/controller/lib/karaf-org.osgi.core.jar']
Timeout running ['fuser', '/opt/bvc/controller/lib/karaf-org.osgi.core.jar']
Traceback (most recent call last):
File "./install", line 193, in main
r_request = ctrl.install_extensions()
File "/opt/bvc/.lib/controller.py", line 855, in install_extensions
if not self.is_running():
File "/opt/bvc/.lib/controller.py", line 238, in is_running
self._karaf_main()
File "/opt/bvc/.lib/controller.py", line 196, in _is_running
[self._fuser(), fuser_path]
File "/opt/bvc/.lib/controller_data.py", line 496, in run_command
os.kill(process.pid, signal.SIGTERM)
AttributeError: 'NoneType' object has no attribute 'pid'


**Installation Failed**
Refer to the install log for more details.

 

Any ideas what is going wrong?

 

Regards,

Swen

Occasional Visitor
Posts: 1
Registered: ‎07-14-2015

Re: Failure installing Vyatta Controller 1.3.0

Hi,

 

Was there a solution to the problem ? I am also getting the same error with 1.3.3. version.

 

[root@SDN-Linux log]# more install_log

Installer arguments: Namespace(i=False, j=None, n=None, s=None, zipfiles=[])

Brocade Vyatta Controller Installation

 

Starting @ : 2015-07-14 17:41:18.877979

 

Performing prerequisite check ...

JDK Check ................................ [ OK ]

Running Command ['/sbin/ip', 'route', 'show']

default via 192.168.1.1 dev eno16777728  proto static  metric 1024

 

default via 192.168.1.1 dev eno16777728  proto static  metric 1024

 

10.64.21.0/24 dev eno33555200  proto kernel  scope link  src 10.64.21.3

 

10.64.21.0/24 dev eno33555200  proto kernel  scope link  src 10.64.21.3

 

192.168.1.0/24 dev eno16777728  proto kernel  scope link  src 192.168.1.22

 

192.168.1.0/24 dev eno16777728  proto kernel  scope link  src 192.168.1.22

 

Running Command ['/sbin/ip', 'addr', 'show', 'dev', '1024']

Device "1024" does not exist.

 

 

Your systems CPU count is 2, recommended is 4 or more to ensure acceptable performance.

 

CPU Count Check: ......................... [ OK ]

Memory Size Check: ....................... [ OK ]

Running Command ['node', '--version']

v0.10.40

 

v0.10.40

 

 

Running pre-install scripts ...

 

Unpacking archives ....................... [ OK ]

 

Setting up karaf container ............... [ OK ]

 

Running controller pre-install scripts ...

Running custom install script: com.brocade.bvc-bvc-core-bvc-controller.preinstall

Running Command ['./com.brocade.bvc-bvc-core-bvc-controller.preinstall']

 

Custom install script complete with code: 0

**********Standard Output*******

[]

********************************

 

 

Configuring base features ................ [ OK ]

Running Command ['fuser', '/opt/bvc/controller/lib/karaf-org.osgi.core.jar']

Timeout running ['fuser', '/opt/bvc/controller/lib/karaf-org.osgi.core.jar']

Traceback (most recent call last):

  File "./install", line 198, in main

    r_request = ctrl.install_extensions()

  File "/opt/bvc/.lib/controller.py", line 906, in install_extensions

    if not self.is_running():

  File "/opt/bvc/.lib/controller.py", line 259, in is_running

    self._karaf_main()

  File "/opt/bvc/.lib/controller.py", line 217, in _is_running

    [self._fuser(), fuser_path]

  File "/opt/bvc/.lib/controller_data.py", line 584, in run_command

    os.kill(process.pid, signal.SIGTERM)

AttributeError: 'NoneType' object has no attribute 'pid'

 

 

**Installation Failed**

Refer to the install log for more details.

Brocadian
Posts: 8
Registered: ‎02-10-2011

Re: Failure installing Vyatta Controller 1.3.0

[ Edited ]

Hi Swen,

 

The problem is most likely the CPU count.

 

 

Your systems CPU count is 2, recommended is 4 or more to ensure acceptable performance.

 

CPU Count Check: ......................... [ OK ]

 

Can you please try with a 4 vCPU VM and see if there are still issue.

 

Thanks,

Michael

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.