SAN Health Utility

Reply
Occasional Contributor
Posts: 7
Registered: ‎04-19-2006

SanHealth 4.0.6 - Can't save company logo in Options -> Report Format tab

Hi all,

 

I can select my chosen image ( appropriately sized ) and it appears in the display box in the tab.

 

Even after I press "DONE", the image isn't saved / re-displayed after I close / re-open SanHealth.

 

Is this a bug or am I simply not doing something that should be obvious?

 

Where is this information stored - Windows Registry ? an INI file of some sort ?  Could I edit / hack the location to make this work ?

 

Any ideas ?

 

Cheers,

 

Nick

Cardiff, UK

 

Moderator
Posts: 202
Registered: ‎07-21-2009

Re: SanHealth 4.0.6 - Can't save company logo in Options -> Report Format tab

Hi major_goat,

Sorry for the trouble. This is the first we've heard of this issue. Can you send this info to shadmin@brocade.com and be sure to include a copy of the image so we can try it on our systems, please? You could also try it out on a different Windows machine to see if the problem is with the machine you are using. The odd, one-off problems that we've seen in the past have been with an obsucure Windows parameter or security setting that was fixed by using a different box. Please let us know the outcome of this test if you do it.

 

Regards,
Health Admin


For the SAN Health Online Help see
http://community.brocade.com/docs/DOC-2662


For the SAN Health Community, please see
http://community.brocade.com/community/forums/products_and_solutions/sanhealth


For the SAN Health Community, please see
http://community.brocade.com/community/forums/products_and_solutions/sanhealth

Occasional Visitor
Posts: 1
Registered: ‎06-09-2011

Re: SanHealth 4.0.6 - Can't save company logo in Options -> Report Format tab

The same happens to all changes I make, including Protocol use under General Options and Automatically Send the BSH Data File in for Processing under the Audit Data File Upload tab

Version 4.0.6

Moderator
Posts: 202
Registered: ‎07-21-2009

Re: SanHealth 4.0.6 - Can't save company logo in Options -> Report Format tab

This is by design. In order to save any changes, you'll need to click "Save" at the top of the screen and save a new .SET file. Then, next time you run SAN Health, open a saved .SET file and you should see all the changed parameters.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.