SAN Health Utility

Reply
Contributor
marcia.ferreira
Posts: 21
Registered: ‎10-08-2012

San Health and different FID


Hi

I'm trying to run SAN Health and I'm having problems with FID, because one of my switch has FID=15 (logical switch configured), and San Health is using FID 128.

I tryed to run "switchshow" using telnet console, and I had to use:

     fosexec -- fid all -cmd "switchshow"

only using this command I had a right output from my switch.

How can I configure San Health to get the right information from FID 15?

thanks

Marcia

Frequent Contributor
HealthAdmin
Posts: 169
Registered: ‎07-21-2009

Re: San Health and different FID

Hi Marcia,

Each virtual fabric needs to have a user id that is set to manage just that VF.  And, each logical switch within that VF needs to have its own IP address.  Please see the SAN Health Online Help page called Using SAN Health at http://community.brocade.com/docs/DOC-2665 for specifics regarding Virtual Fabrics/Logical Switches and SAN Health.

Regards,

Health Admin

Occasional Contributor
ignacio.vidal
Posts: 5
Registered: ‎12-07-2010

Re: San Health and different FID

Hi Marcia,

Just configure a "local" user for the logical switch with FID=15 (userconfig --add Username -r admin -l 15 -h 15 -d "user for FID 15" )

And use that user for SanHealth.

The connection from SanHealth to the logical switch will have a "home" virtual fabric at FID=15

Just check FOS command reference for "userconfig".

Regards

Ignacio

Contributor
marcia.ferreira
Posts: 21
Registered: ‎10-08-2012

Re: San Health and different FID

Hi guys

Many thanks for all information. It's working very well now.

cheers

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.