SAN Health Utility

Reply
Occasional Contributor
Posts: 17
Registered: ‎12-23-2012

SAN Health 4.0.5b on Cisco MDS 9500 switches failing for 1 Swtich in the fabric

HI Team,

 

Brocade SAN Health 4.0.5b is failing for only 1 Switch in the 7 switch fabric.

 

Switch model is Cisco MDS 9513.

 

Errors are as follows

 

"Ignoring incorrectly structured node"

 

"Expected data from <switch Ip> was incorrectly formatted on insertion "

 

 

Please help with any pointers for resolution.

Moderator
Posts: 206
Registered: ‎07-21-2009

Re: SAN Health 4.0.5b on Cisco MDS 9500 switches failing for 1 Swtich in the fabric

Hi Anand,

This is a known issue with SAN Health 4.0.5b and will be addressed in the next release. The simple workaround for now is to select the switch, then go to the Switch tab and click the Test Connectivity Get Swtich Details button to force SAN Health to rediscover the switch. Then, run the audit. Please let us know at shadmin@brocade.com if you have any other issues.

 

Cheers,

Health Admin

Frequent Visitor
Posts: 1
Registered: ‎03-31-2014

Re: SAN Health 4.0.5b on Cisco MDS 9500 switches failing for 1 Swtich in the fabric

SAN Health 4.0.5b on SAN384B and SAN96B5 all switches failing. On two fabics

Moderator
Posts: 206
Registered: ‎07-21-2009

Re: SAN Health 4.0.5b on Cisco MDS 9500 switches failing for 1 Swtich in the fabric

[ Edited ]

Hi Alex,

Did you try the workaround from my post above? If so, please send the .log to shadmin@brocade.com and we can help you further. If not, please try it and let us know the outcome. So far it has worked for the several people that have encountered the issue.

-HeatlhAdmin

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.