08-13-2013 04:14 PM
We currently have 3 7131 set up around our building. One is acting as the virtual controller, the rest are linked to it. Everything else is pretty straight forward. We have a cable modem connected to a sonic wall which then goes into our switches. I know very little about the 7131's and have them mostly on the default settings. I can't seem to get computers connected at 5 GHz as well as anything higher than wireless g.
08-13-2013 06:57 PM
Depending on how the 5 GHz and 2.4 GHz radios are configured, the LEDs will blink at different intervals between amber and yellow (5 GHz radio) and emerald and yellow (2.4 GHz radio). Assuming you have a dual-radio model, check if your 4th LED blinks in Amber. Blinking Amber indicates 802.11a activity. A 5 second Amber and Yellow blink rate defines 802.11an activity.
08-13-2013 07:17 PM
If you have a Tri-Radio model, all the six LEDs on top of the access point will illuminate. Five LEDs illuminate (on top of the housing) for dual radios models, and four illuminate for single radio models.