Management Software

Reply
Frequent Visitor
Posts: 1
Registered: ‎07-05-2016

What is the OID to monitoring FLASH USAGE on Switch Brocade VDX6740?

Was done the download of MIB and the monitor of cpu, mem, ports and another option required for my customer was accomplished. I I have two question:

Can I monitor the space of flash usage on my switch brocade vdx6740 via MIB or OID?

What is the OID to monitoring FLASH USAGE on Switch Brocade VDX6740?

Brocade Moderator
Posts: 3
Registered: ‎11-20-2010

Re: What is the OID to monitoring FLASH USAGE on Switch Brocade VDX6740?

Hello,

 

If you haven't done so already, you can refer to the NOS MIB Reference Guide for the version you are running.  For NOS 7.0, the available OIDs to monitor FLASH are:

 

swFlashDLOperStatus

1.3.6.1.4.1.1588.2.1.1.1.1.11

Read-only

The operational status of the flash.

Possible values:

unknown (0) - Indicates that the operational status of the flash is unknown.

swCurrent (1) - Indicates that the flash contains the current firmware image or configuration file.

swFwUpgraded (2) - Indicates that the flash contains the upgraded image from the swFlashDLHost.0.

swCfUploaded (3) - Indicates that the switch configuration file has been uploaded to the host.

swCfDownloaded (4) - Indicates that the switch configuration file has been downloaded from the host.

swFwCorrupted (5) - Indicates that the firmware in the flash of the switch is corrupted.

 

swFlashDLAdmStatus
1.3.6.1.4.1.1588.2.1.1.1.1.12
Read-write
The state of the flash.
Possible values:
•   swCurrent (1) - The flash contains the current firmware
image or configuration file.
•   swFwUpgrade (2) - The firmware in the flash is to be
upgraded from the host specified.
•   swCfUpload (3) - The switch configuration file is to be
uploaded to the host specified.
•   swCfDownload (4) - The switch configuration file is to be
downloaded from the host specified.
•   swFwCorrupted (5) - The firmware in the flash is corrupted.
This value is for informational purposes only; however,
setting swFlashDLAdmStatus to this value is not allowed.

 

I hope this helps.

 

Best Regards,

Dave

Brocadian
Posts: 89
Registered: ‎06-29-2015

Re: What is the OID to monitoring FLASH USAGE on Switch Brocade VDX6740?

I haven't found any way of monitoring available flash space. The above MIBs tell you a bit about the status, but it doesn't look like it's possible to see how much free space is left.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.