Management Software

Reply
m1
New Contributor
Posts: 4
Registered: ‎12-04-2009

Trying to discover 48000 with EFCM 9.5

I'm trying to get EFCM 9.5, running on a Windows workstation, to discover a 48000 (running Fabric OS v5.3.0).  EFCM says "Not discovered. No SNMP response (Initial discovery failed)".  I can telnet into the active CP from the workstation.  What could be preventing EFCM from discovering the switch?

External Moderator
Posts: 4,788
Registered: ‎02-23-2004

Re: Trying to discover 48000 with EFCM 9.5

m1,

i believe EFCM 9.6 is a min.Release wich support Brocade 48000 with FabricOS 5.3.x

Tipp, is the error not caused by "unsupported" release....

you wrote.. --->>>I can telnet into the active CP from the workstation.

.....check you IP Address, Firewall between PC and 48000.

Is the 48000 in Admin Domain Mode configure ?

TechHelp24
m1
New Contributor
Posts: 4
Registered: ‎12-04-2009

Re: Trying to discover 48000 with EFCM 9.5

I changed the IP address for EFCM to discover from the CP's IP address to the SW's IP address.  EFCM 9.5 has now discovered the 48000.

Thanks!

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.