Configuration file & Example Output for MRTG on Win32 Includes:
- Inside Frame Errors
- Outside Frame Errors
- Readys Exceeded
- No Transmit Credits
- Frames TX
- Frames RX
- Words TX
- Words RX
Operating System Any Win32 - Written on Windows 2000
Interface Command Line + Config File
Fabric Operating System Kernel : 5.3.1
Fabric OS : v3.0.2h
Made on : Thu Sep 26 15:10:24 PDT 2002
Flash : Thu Sep 26 15:11:49 PDT 2002
BootProm : Tue Oct 30 10:24:38 PST 2001
Other Additions / Recommendations Welcome
NOTES (INCLUDING LIMITATIONS)
This MRTG config is based on some assumptions:
Files saved in d:\wwwroot\MRTG as specified by config file line: WorkDir: d:\wwwroot\MRTG You will need to set this to your MRTG Directory.
Also default folder for the files is specified by config line: Directory[_]: ftwtan01
Device network name is specified by 16 (# of ports) config lines:
You should change ftwtan01 & ftwtan01.xtonet.com to the name of your device.
Public is the default SNMP community name. You will need to set this in the config file if you have changed yours.
NOTE: This contribution was migrated by Brocade from the former Brocade Connect community on March 13, 2008, on behalf of the author.