Brocade MyBrocade Transformation BCSDL12125SG A


Management Software

Reply
Occasional Contributor
Posts: 6
Registered: ‎12-08-2016

MAPS Alerts notifications configuration

Hi,

 

I would like to configure MAPS for sending automatic e-mail in case of Power Supply failure or Fan failure.

 

Is there somewhere a simply example witch explain "how to".

 

Thank you.

Regards.

Lionel

Brocade Moderator
Posts: 151
Registered: ‎08-31-2009

Re: MAPS Alerts notifications configuration

[ Edited ]

Hello,

 

Does MAPS is already enable into your environment?

Have you configured the email server and tested it?

What is the FOS release?

 

 

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"
Occasional Contributor
Posts: 6
Registered: ‎12-08-2016

Re: MAPS Alerts notifications configuration

Hello,

 

FOS : 7.4.1d

MAPS license on switch : yes

e-mail configured and tested : yes

 

But i don't know how to configure alerts.

 

Regards.

Brocade Moderator
Posts: 151
Registered: ‎08-31-2009

Re: MAPS Alerts notifications configuration

Hello,

 

Attached is the necessary configuration guide for enable MAPS alerting. You will find samples and how to configure it.

 

 

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"
Occasional Contributor
Posts: 6
Registered: ‎12-08-2016

Re: MAPS Alerts notifications configuration

I know this guide, but i don't see any example to configure PS Failed Alert or Fan Failed Alert Smiley Sad

 

 

Brocade Moderator
Posts: 151
Registered: ‎08-31-2009

Re: MAPS Alerts notifications configuration

Hello,

 

First, you have to enable maps with a policy.

For your case, dflt_base_policy could be fine but you can choose others.

 

mapsconfig --enablemaps -policy dflt_base_policy

mapsconfig --actions raslog,email,sw_marginal

 

Verification:

mapsconfig --show

mapsdb --show all

 

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"
Occasional Contributor
Posts: 6
Registered: ‎12-08-2016

Re: MAPS Alerts notifications configuration

Do you know if there is somewhere a french version of MAPS guide ?

Occasional Contributor
Posts: 6
Registered: ‎12-08-2016

Re: MAPS Alerts notifications configuration

Is it sufficient with below configuration ? Will i  receive an email in case of a PS Failure or a Fan Failure ?

 

mapsconfig --show
Configured Notifications:       RASLOG,EMAIL,SW_MARGINAL
Mail Recipient:                 my_email_address
FPI Monitoring:                 Enabled
Paused members :
===============
PORT :
CIRCUIT :
SFP :

 

mapsdb --show all

1 Dashboard Information:
=======================

DB start time:                  Fri Oct 28 09:42:53 2016
Active policy:                  dflt_base_policy
Configured Notifications:       RASLOG,EMAIL,SW_MARGINAL
Fenced Ports :                  None
Decommissioned Ports :          None
Quarantined Ports :             None

2 Switch Health Report:
=======================

Current Switch Policy Status: HEALTHY


3.1 Summary Report:
===================

Category                 |Today                     |Last 7 days               |
--------------------------------------------------------------------------------
Port Health              |No Errors                 |In operating range        |
BE Port Health           |No Errors                 |No Errors                 |
Fru Health               |In operating range        |In operating range        |
Security Violations      |No Errors                 |No Errors                 |
Fabric State Changes     |No Errors                 |No Errors                 |
Switch Resource          |In operating range        |In operating range        |
Traffic Performance      |In operating range        |In operating range        |
FCIP Health              |Not applicable            |Not applicable            |
Fabric Performance Impact|In operating range        |In operating range        |


3.2 Rules Affecting Health:
===========================

Category(Rule Count)|RepeatCount|Rule Name                  |Execution Time   |Object           |Triggered Value(Units)|
------------------------------------------------------------------------------------------------------------------------

4 History Data:
===============

Stats(Units)        Current     12/01/16    11/07/16    --/--/--    --/--/--    --/--/--    --/--/--
                    Port(val)   Port(val)   Port(val)
----------------------------------------------------------------------------------------------------
CRC(CRCs)           -           -           -           -           -           -           -
ITW(ITWs)           -           -           -           -           -           -           -
LOSS_SYNC(SyncLoss) -           -           -           -           -           -           -
LF                  -           -           -           -           -           -           -
LOSS_SIGNAL(LOS)    -           -           -           -           -           -           -
PE(Errors)          -           -           -           -           -           -           -
STATE_CHG           -           -           -           -           -           -           -
LR                  -           27(1)       -           -           -           -           -        
C3TXTO(Timeouts)    -           -           26(6)       -           -           -           -        
RX(%)               0(13.52)    0(13.69)    0(14.73)    -           -           -           -        
                    9(9.32)     9(6.86)     9(9.77)     -           -           -           -        
                    1(5.03)     8(4.40)     18(3.76)    -           -           -           -        
                    18(3.82)    18(3.84)    26(2.48)    -           -           -           -        
                    27(2.54)    26(2.75)    16(1.97)    -           -           -           -        
TX(%)               2(11.15)    2(11.51)    2(12.63)    -           -           -           -        
                    26(9.09)    26(10.56)   26(9.68)    -           -           -           -        
                    16(5.24)    0(3.58)     0(3.32)     -           -           -           -        
                    0(3.64)     16(2.37)    16(2.50)    -           -           -           -        
                    1(2.21)     13(2.34)    9(2.16)     -           -           -           -        
UTIL(%)             0(8.58)     0(8.64)     0(9.02)     -           -           -           -        
                    2(5.63)     26(6.66)    2(6.49)     -           -           -           -        
                    9(5.22)     2(6.01)     26(6.08)    -           -           -           -        
                    26(5.13)    9(4.50)     9(5.96)     -           -           -           -        
                    16(3.80)    8(2.91)     18(2.80)    -           -           -           -        
BN_SECS(Seconds)    -           -           -           -           -           -           -

5 History Data for Backend ports:
=================================
Stats(Units)        Current     12/01/16    11/07/16    --/--/--    --/--/--    --/--/--    --/--/--
----------------------------------------------------------------------------------------------------
CRC(CRCs)           -           -           -           -           -           -           -
ITW(ITWs)           -           -           -           -           -           -           -
LR                  -           -           -           -           -           -           -
BAD_OS(Errors)      -           -           -           -           -           -           -
FRM_LONG(Errors)    -           -           -           -           -           -           -
FRM_TRUNC(Errors)   -           -           -           -           -           -           -

Brocade Moderator
Posts: 151
Registered: ‎08-31-2009

Re: MAPS Alerts notifications configuration

Hello,

 

We have not this documentation available in French.

Yes your configuration is good, you are monitoring FRUs (Powers and FANs are in).

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers. All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. If this provided you with a solution to this issue, please mark it with the button at the bottom "Accept as solution"
Highlighted
Occasional Contributor
Posts: 6
Registered: ‎12-08-2016

Re: MAPS Alerts notifications configuration

Thank a lot Thierry !

 

Regards.

Lionel

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.