Management Software

Reply
New Contributor
Posts: 3
Registered: ‎11-24-2008

DCFM / FOS 5.3.0D SNMPv3

Currently i'm investigating the implementation of DCFM to replace FM. The new security policy dictates that we have to use SNMPv3. But after configuring SNMPv3 on the command line and in DCFM, i get the message "Statistics collection failed for the switch x.x.x.x invalid snmp connections".

The following configuration was used for the switch:

Configure --> snmp --> security level 2

snmpconfig --set snmpv3 -->

SNMPv3 USM configuration:
User 1 (rw): admin
        Auth Protocol: MD5
        Priv Protocol: DES
User 2 (rw): test
        Auth Protocol: noAuth
        Priv Protocol: noPriv
User 3 (rw): snmpadmin3
        Auth Protocol: noAuth
        Priv Protocol: noPriv
User 4 (ro): snmpuser1
        Auth Protocol: noAuth
        Priv Protocol: noPriv
User 5 (ro): snmpuser2
        Auth Protocol: noAuth
        Priv Protocol: noPriv
User 6 (ro): snmpuser3
        Auth Protocol: noAuth
        Priv Protocol: noPriv

SNMPv3 Trap configuration:
Trap Entry 1:    x.x.x.x (DCFM ip)

    Trap User: admin
    Trap recipient Severity level: 4
Trap Entry 2:    No trap recipient configured yet
Trap Entry 3:    No trap recipient configured yet
Trap Entry 4:    No trap recipient configured yet
Trap Entry 5:    No trap recipient configured yet
Trap Entry 6:    No trap recipient configured yet

snmpconfig --set accesscontrol

SNMP access list configuration:
Entry 0:  Access host subnet area x.x.x.x (rw) (DCFM network ip address)
Entry 1:  No access host configured yet
Entry 2:  No access host configured yet
Entry 3:  No access host configured yet
Entry 4:  No access host configured yet
Entry 5:  No access host configured yet

--show mibCapability

FE-MIB:YES
SW-MIB: YES
FA-MIB: YES
FICON-MIB: YES
HA-MIB: YES
FCIP-MIB: NO
SW-TRAP: YES
   swFCPortScn: YES
   swEventTrap: YES
   swFabricWatchTrap: YES
   swTrackChangesTrap: YES
FA-TRAP: YES
   connUnitStatusChange: YES
   connUnitEventTrap: YES
   connUnitSensorStatusChange: YES
   connUnitPortStatusChange: YES
SW-EXTTRAP: NO
FICON-TRAP: YES
   linkRNIDDeviceRegistration: YES
   linkRNIDDeviceDeRegistration: YES
   linkLIRRListenerAdded: YES
   linkLIRRListenerRemoved: YES
   linkRLIRFailureIncident: YES
HA-TRAP: YES
   fruStatusChanged: YES
   cpStatusChanged: YES
   fruHistoryTrap: YES


snmpconfig --show systemGroup
       sysDescr = DS-200B
       sysLocation = End User Premise.
       sysContact = Field Support.
       authTraps = 0 (OFF)

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.