Management Software

Reply
New Contributor
Posts: 2
Registered: ‎05-23-2014

Brocade IBM 6547: Discovered: SNMP communication failed. SNMP credentials may be invalid. : Not registered for SNMP Traps

Brocade IBM 6547 is not available for monitoring through SNMP, I did the following actions:

 

ipfilter --clone new_ipv4 -from default_ipv4
ipfilter --delrule new_ipv4 -rule 2
ipfilter --delrule new_ipv4 -rule 6
ipfilter --addrule new_ipv4 -rule 2 -sip any -dp 23 -proto tcp -act permit
ipfilter --addrule new_ipv4 -rule 6 -sip any -dp 80 -proto tcp -act permit
ipfilter --delrule new_ipv4 -rule 7
ipfilter --activate new_ipv4
ipfilter --show

 

This actions permit login from connectrix but not to configure SNMP.

 

Thanks

New Contributor
Posts: 2
Registered: ‎05-23-2014

Re: Brocade IBM 6547: Discovered: SNMP communication failed. SNMP credentials may be invalid. : Not registered for SNMP Traps

FabOS: v7.2.0b1

Network Advisor: 12.0.1

 

 

New Contributor
Posts: 5
Registered: ‎11-08-2011

Re: Brocade IBM 6547: Discovered: SNMP communication failed. SNMP credentials may be invalid. : Not registered for SNMP Traps

On the swith admin -> SNMP tab

Set one of the SNMP v3 user to send trap to Network Advisor IP address with Trap level 4.

Also add the Network advisor server ip address in the access control list for SNMP on each switch.

 

I added with read only permission and all the errors gone away after few minutes

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.