Fibre Channel (SAN)

switchshow.pl

by gaijin on ‎02-26-2006 04:00 PM - edited on ‎10-30-2013 01:28 PM by bcm1 (933 Views)

DETAILED DESCRIPTION  

Example usage/output
#######################
root@dun_cbsnorth1 # ./switch_show.pl > /tmp/switch_output
root@dun_cbsnorth1 # cat /tmp/switch_output Checking switch_name Trying 192.5.133.206...
Connected to liv12000c0.sssl.bskyb.com.
Escape character is '^]'. 

Fabric OS (12000C) 12000C_cp1 login: admin 
Password: switchshow 
LIV12000C_0: admin> switchshow 
switchName: LIV12000C_0 
switchType: 10.0 
switchState: Online 
switchMode: Native 
switchRole: Subordinate 
switchDomain: 3 
switchId: fffc03 
switchWwn: 10:00:00:60:69:80:6e:ff 
zoning: ON (12000A_0_CFG) 
switchBeacon: OFF 
blade1 Beacon: OFF 
blade2 Beacon: OFF 
blade3 Beacon: OFF 
blade4 Beacon: OFF 
Area Slot Port Media Speed State 
===================================== 
0 1 0 id N2 Online E-Port 10:00:00:60:69:80:6e:d9 "12000C_1" (downstream)(Trunk master) 
1 1 1 id N2 No_Light 
2 1 2 id N2 Online F-Port 50:06:01:60:30:60:15:ff 
3 1 3 id N2 No_Light<hr />

 


REQUIREMENTS 

Operating System Tested on Solaris 8 and 9. 

Interface CLI 

Fabric Operating System 4.x 

Other None 

 

NOTES (INCLUDING LIMITATIONS) 

Change the IP addresses to match your SAN. 

 

NOTE: This contribution was migrated by Brocade from the former Brocade Connect community on March 13, 2008, on behalf of the author.

Contributors