Fibre Channel (SAN)

Reply
New Contributor
Posts: 2
Registered: ‎05-23-2011

pb 5100

hi

i have a pb on my switch  when  it reboot i have message bad  magic number

see capture below

 

The system is coming up, please wait...


U-Boot 1.1.3 (May 4 2012 - 08:34:20)

CPU: AMCC PowerPC 440EPx Rev. A at 660 MHz (PLB=132, OPB=66, EBC=33 MHz)
No Security/Kasumi support
I2C boot EEPROM enabled
Bootstrap Option G - Boot ROM Location I2C (Addr 0x54)
Internal PCI arbiter enabled, PCI async ext clock used
32 kB I-Cache 32 kB D-Cache
Board: Spirit
I2C: ready
DRAM: Initializing DDRSDRAM
DDR Init: speed = 132000002
DQS calibration - Window detected:
max_passing_cases = 53
wr_dqs_shift = 89
dll_dqs_delay_X = 31
dll_dqs_delay_X window = 5 - 57
DDR0_09=0x00011d59
DDR0_22=0x0026790b
DDR0_17=0x1f005f00
DDR0_18=0x1f1f1f1f
DDR0_19=0x1f1f1f1f
ECC Enabling DONE
512 MB
POST RAM test disabled.
Now running in RAM - U-Boot at: 1fb2f000
trap_init : 0x0
system inventory subsystem initialized
FLASH: Spirit CFI Flash Driver Initialized
4 MB
ATA interface setup: io_base=0xf8f00000, port=0x3e0, ctl=0x7ec
bootrom_verbose_flag=1
PCI:
Skip our host bridge
00 07 1657 0010 0280 18
In: serial
Out: serial
Err: serial
Net:

set_bootstatus: BS_LOAD_OS, platform_idx = 3

Type run flash_nfs to mount root filesystem over NFS

Hit ESC to stop autoboot: 0
ATA device vendor SILICONSYSTEMS INC 1GB-3620, product B841319KM1TM0915TH09, revision 241-0230
Map file at LBA sector 0x94f98
Blk map has an invalid version 760124444
## Booting image at 00400000 ...
Bad Magic Number

The system is coming up, please wait...


U-Boot 1.1.3 (May 4 2012 - 08:34:20)

CPU: AMCC PowerPC 440EPx Rev. A at 660 MHz (PLB=132, OPB=66, EBC=33 MHz)
No Security/Kasumi support
I2C boot EEPROM enabled
Bootstrap Option G - Boot ROM Location I2C (Addr 0x54)
Internal PCI arbiter enabled, PCI async ext clock used
32 kB I-Cache 32 kB D-Cache
Board: Spirit
I2C: ready
DRAM: Initializing DDRSDRAM
DDR Init: speed = 132000002
DQS calibration - Window detected:
max_passing_cases = 53
wr_dqs_shift = 95
dll_dqs_delay_X = 31
dll_dqs_delay_X window = 5 - 57
DDR0_09=0x00011d5f
DDR0_22=0x00267f0b
DDR0_17=0x1f005f00
DDR0_18=0x1f1f1f1f
DDR0_19=0x1f1f1f1f
ECC Enabling DONE
512 MB
POST RAM test disabled.
Now running in RAM - U-Boot at: 1fb2f000
trap_init : 0x0
system inventory subsystem initialized
FLASH: Spirit CFI Flash Driver Initialized
4 MB
ATA interface setup: io_base=0xf8f00000, port=0x3e0, ctl=0x7ec
bootrom_verbose_flag=1
PCI:
Skip our host bridge
00 07 1657 0010 0280 18
In: serial
Out: serial
Err: serial
Net:

set_bootstatus: BS_LOAD_OS, platform_idx = 3

Type run flash_nfs to mount root filesystem over NFS

Hit ESC to stop autoboot: 0

1) Start system.
2) Recover password.
3) Enter command shell.

Option?

 

thank for help

regards

Frequent Contributor
Posts: 141
Registered: ‎05-26-2009

Re: pb 5100

Switch needs to be replaced.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.