Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 9
Registered: ‎05-20-2012

fabricshow not showing FCR

Hi all,

in my FCblade FR4-18i  i have a fcip tunnel and it's working fine too. but >fabricshow output is not showing the FCR_XD_1_1 name in the list where in other side the switch showing that information. i don't find any error dump on that related

Firmware is : 6.4.2a

Occasional Contributor
Posts: 9
Registered: ‎05-20-2012

Re: fabricshow not showing FCR

secondary site fabricshow where it shows fcr details

QTR_TWR_M48_01:admin> fabricshow
Switch ID   Worldwide Name           Enet IP Addr    FC IP Addr      Name
-------------------------------------------------------------------------
  2: fffc02 50:00:51:e5:51:f5:6f:af 0.0.0.0         0.0.0.0         "fcr_xd_2_1"
  5: fffc05 10:00:00:05:1e:07:ad:2c 172.24.21.129   0.0.0.0        >"DRHPEN1SW1"
35: fffc23 10:00:00:05:1e:36:3c:e6 172.24.20.247   0.0.0.0         "QTR_TWR_M48_01"
160: fffca0 50:00:51:e3:67:4e:ae:65 0.0.0.0         0.0.0.0         "fcr_fd_160"

External Moderator
Posts: 4,857
Registered: ‎02-23-2004

Re: fabricshow not showing FCR

for 7800 / 7500 / FX8-24 / FR4-18i

use the command

"fcrfabricshow"


TechHelp24
Occasional Contributor
Posts: 9
Registered: ‎05-20-2012

Re: fabricshow not showing FCR

Hi Antonio,

when i am checking the other end is not showing the details . attached the details for reference

In primry site switch output

-----------------------------------------------------------------

QDC_SAN_M48_02:admin> fcrfabricshow

FC Router WWN: 10:00:00:05:1e:36:74:ea, Dom ID:   1,

Info: 172.24.10.213, "QDC_SAN_M48_02"

   EX_Port       FID    Neighbor Switch Info (enet IP, WWN, name)

   ------------------------------------------------------------------------

     192        101     172.24.20.247    10:00:00:05:1e:36:3c:e6   "QTR_TWR_M48_01"

in secondart site switch output


-----------------------------------------------------------------
QTR_TWR_M48_01:admin> fcrfabricshow
FC Router WWN: 10:00:00:05:1e:36:3c:e6, Dom ID:  35,
Info: 172.24.20.247, "QTR_TWR_M48_01"
   EX_Port       FID    Neighbor Switch Info (enet IP, WWN, name)
   ------------------------------------------------------------------------
      N/A

External Moderator
Posts: 4,857
Registered: ‎02-23-2004

Re: fabricshow not showing FCR

--->>> when i am checking the other end is not showing the details

"fcrfabricshow" show all EX-Port / Fabric ID configured device.

from output I see, you have total of TWO 48000 with each ONE FR4-18i, is correct ?

if yes, are all attached Device in second FR4 Blade configured in EX Mode ?

are you able to run san health and send me the report by email at abongiorno_at_techhelp24.net ?


TechHelp24

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.