Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 15
Registered: ‎06-22-2006

a question about fabric watch

hi,

External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: a question about fabric watch

Hi ibm2109,What of Switch Model is that ?

TechHelp24
Frequent Contributor
Posts: 89
Registered: ‎05-12-2004

Re: a question about fabric watch

Event 0 is the intialization eventI believe the * indicates what the current state is, "in-between" in your case

Occasional Contributor
Posts: 15
Registered: ‎06-22-2006

Re: a question about fabric watch

another thing looks strange:Any idea about this?

External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: a question about fabric watch

Hi ibm2109,So i understand the other Switch work Fine, and the Cable is OK. Is possible to replace the SFP from they Switch that create the Error ? Is this Error in the same Port or of all Port these Switch ? Have here any Free unused Port to test is the Error longer apperar or no ?

TechHelp24
Occasional Contributor
Posts: 15
Registered: ‎06-22-2006

Re: a question about fabric watch

Actually, I unplug the cable connected to one HBA on a host server (two HBAs installed on this server),and then plug in. Then I unplug the cable connected to another HBA and then plug.Any hints?

External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: a question about fabric watch

Hi ibm2109,FW-1436 is for WARNING example Sync error ( this because FW-1425, also Normal ) but that can be caused by CRC Error or Other serios Problem whit the switch. they find all this Error listed in the Systems Error Message Reference Manual, Pubblication 53-0000515-11

TechHelp24
Frequent Contributor
Posts: 89
Registered: ‎05-12-2004

Re: a question about fabric watch

check 'switchstatuspolicyshow' on both switches, my guess is that they are different.

Occasional Contributor
Posts: 15
Registered: ‎06-22-2006

Re: a question about fabric watch

the switchstatuspolicyshow are the same on both switches.I guess that's the reason why one switch log message while the other didn't. But why were they different?

External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: a question about fabric watch

Hi ibm2109,I say im my Message Posted Thu July 13 2006 10:50 AM and in the Message Posted Fri July 14 2006 07:51 AM, they have a serios Problem. I assume that this One Port self in the Switch is damaged, but i have another Idee to make sure you can reset the switch to Factory Default, delete all errlog. Before you reset the Switch to Factory Default save the Config and the License from the switch.

TechHelp24

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.