Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 11
Registered: ‎10-08-2014

Which MIB files to install? ~(FOS 7.3.1_All_mibs)

Hi all,

           I've got FOS 7.3.1 GA running on some HP badged 8/24 B Series switches. I was going to install the mibs into our management software (HP SIM 7.x) however after unpacking the tar.gz in which the mibs came i see there are quite of lot of files.

 

 

I am guessing i don't need all of these? Do I? 

 

03/08/2012 21:38 4,030 bcCustomOperation.mib
13/04/2014 08:41 10,323 bd.mib
30/04/2013 19:02 2,890 BRCD_REG.mib
30/04/2013 19:02 2,401 BRCD_TC.mib
30/04/2013 19:02 9,405 brcdfcip.mib
24/04/2013 18:38 7,876 BROCADE-MAPS-MIB.mib
16/05/2005 22:25 75,445 CPQ_HOST.mib
16/05/2005 22:25 130,910 CPQ_RACK.mib
23/11/2009 06:36 107,945 FA.mib
28/01/2014 01:59 10,932 faext.mib
30/04/2013 19:02 24,171 FICON.mib
26/04/2013 22:02 14,856 fod.mib
11/05/2013 00:02 12,703 HA.mib
26/03/2014 18:34 57,576 IbmBladeCenter.mib
23/09/2014 10:50 149,086 SW.mib

 

Can anyone advise the ones I should be using. I am guessing SW.mib only but any advice appreciated

 

thanks.
Ad

Frequent Contributor
Posts: 76
Registered: ‎04-17-2010

Re: Which MIB files to install? ~(FOS 7.3.1_All_mibs)

From what I recall you obviously won't per se need all of them, but there may be some dependencies between the MIB files - reason why they need to be imported in a specific order.

 

Refer to the corresponding MIB guide for more details.

 

Hope this helps.

 

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.