04-08-2014 09:55 AM
I am currently on 5.2.2
I would like to get to 7.1.xxx
Equipment is a Brocade SW200e
Can someone suggest upgrade path and point me in the direction of the downloads?
04-08-2014 10:21 AM
200e supports 6.2.2.f at most >http://www.brocade.com/downloads/documents/technical_briefs/brocade-fos-target-path-tb.pdf
The way to get there differs depending on the vendor, HP for instance suggests 5.2.3 > 5.3.2c > 6.0.1a > 6.1.2b or c > 6.2.2f
04-08-2014 11:32 AM
Brocade has those files if you have a support contract with them.
Most likely you bought those switches from Dell/EMC/HP/any other vendor.
If you did look at that vendors support site.
If you didn't and don't have Brocade support or other support, you can try the page I linked before
However I wouldn't try this without accepting a risk of breaking your switch, and to be honest B200e are very old, 5/6 years already I would look for a replacement to do an rip and replace.
From that point onwards you can maintain the FW level of a more regular basis