Fibre Channel (SAN)

Reply
Contributor
Posts: 47
Registered: ‎07-21-2009

Switch hardware errors

Hello,

  I am getting the following errors on a DCX switch. Does anyone know what it means. Also is there any document that lists this type of errors and probable cause/fix.

Critical S5,C3: Above normal hardware errors were observed: fault1:0xd, fault2:0x64 thresh2:0xb0000064. Chassis 71 1 C3-1010

Thanks

Moeen

Frequent Contributor
Posts: 160
Registered: ‎08-07-2009

Re: Switch hardware errors

From the FOS 7.1 Message Reference Guide:

C3-1010

Message                S<slot number>,C<chip index>: Above normal hardware errors were observed:

                             fault1:0x<fault1_cnt>, fault2:0x<fault2_cnt> thresh2:0x<threshold_used>.

Message Type        LOG

Severity                  CRITICAL

Probable Cause      Indicates that above-normal errors were observed in hardware that may or may not impact the data

                              traffic.

Recommended        When this error is observed persistently, power cycle the specified blade using the slotPowerOff

Action                      and slotPowerOn commands. If the problem persists, replace the blade.

Frequent Contributor
Posts: 90
Registered: ‎12-26-2010

Re: Switch hardware errors

is it a core blade in your case?

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.