Fibre Channel (SAN)

Reply
New Contributor
Posts: 2
Registered: ‎08-11-2008

Switch Event errors

To All,

We are receiving the following error messages on both our switches:

FW-ABOVE2 fcpportSync000, FOP Port #000 Loss of Sync is above high boundary. current value: 12 Error(s)/minute. (faulty) (see attached)

Any ideas? Cannot seem to find any info on this even in the Fabric OS 3.10 System Error Messages guide.

Thanks

Doug

External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: Switch Event errors

dougmcc,

--->>> ...on both our switches:

Are both switch as ISL connected ?

its appear the error is coming from a defective SFP or Cable.

Replace this one or reset the appropiate Port.

TechHelp24

TechHelp24
New Contributor
Posts: 2
Registered: ‎08-11-2008

Re: Switch Event errors

Thanks for the reply but when you mean reset the appropriate port, do you mean reset the counters or the port itself. How (command line)?

Thanks

Doug

External Moderator
Posts: 4,907
Registered: ‎02-23-2004

Re: Switch Event errors

Yes, or you set the "portcfgdefault" but here must your reconfig the Port.

Or a FabOS upgrade.

3.1.0 is very Old, the last Rel.is 3.2.1c

TechHelp24

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.