Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 5
Registered: ‎10-30-2010

SilkWorm 3200 Fibre Channel

I have  an EMC CLARiiON with two brocade 3200 switch's Fibre Channel and I need  to configure, where I can get the software for administration of these  switch's?

Super Contributor
Posts: 644
Registered: ‎03-01-2007

Re: SilkWorm 3200 Fibre Channel

trough the GUI called webtools or the command line.

another software like Fabric Manager ( is not longer available )

or EFCM is EOL

for FM and EFCM must purchas a license, for arond 10K USD

DCFM not support the 3200.

such management software are intended to use for a large fabric, and not make sense to use with two small 3200 switches.

Super Contributor
Posts: 635
Registered: ‎04-12-2010

Re: SilkWorm 3200 Fibre Channel

This can be done by using FabricWatch.

FabricWatch can send alters when links goes up and down as well if devices logs in or out.

Fabricwatch need a separate license.

It is not needed to sniff for frames if you are looking for basic overall fabric events.

Please mark this thread as answered if you are happy with this answer.

Andreas

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.