Fibre Channel (SAN)

Reply
New Contributor
Posts: 3
Registered: ‎03-07-2017

San Brocade 5100 won't Booting

Hello All,

 

Please help me.. I have some problem with my San Switch Brocade 5100 won't booting.

I have restart but still problem..

The problem occur suddenly, and cannot ping (icmp) that device, and I console this device i found log, like below:

 

WARNING: Boot Monitor checksum failure, primary partition.

 

WARNING: Boot Monitor checksum failure, mirror partition.

 

ERROR: Boot Monitor Selector failed to find a bootable image!ÿ The system is coming up, please wait...

 

Could you give me solution.. may be step bu step i must do it.

 

Thank you for your kind cooperation..

 

Best Regards,

Elzantes

New Contributor
Posts: 3
Registered: ‎03-07-2017

Re: San Brocade 5100 won't Booting

Please help me.. maybe anybody can give me some advice..

External Moderator
Posts: 4,788
Registered: ‎02-23-2004

Re: San Brocade 5100 won't Booting

@elzantes

 

show as a Hardware Failure or the CF Inside is damaged.

 

I would suggest to open a TAC with Brocade or they OEM Provider or Vendor

TechHelp24
New Contributor
Posts: 3
Registered: ‎03-07-2017

Re: San Brocade 5100 won't Booting

Dear Antonio,

 

Ouhh.. there are hardware failure.. so the device can back to normal again or not?

Ookay, I'ill contact the Vendor.

 

Thank you for you advice

External Moderator
Posts: 4,788
Registered: ‎02-23-2004

Re: San Brocade 5100 won't Booting

if the switch have a hardware failure, as saied you have to open a TAC and in some circumstance the Switch must be replaced,

 

Premise you have a Active Maintenance Contract !!!

 

good luck

TechHelp24

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.