Fibre Channel (SAN)

Reply
New Contributor
deepak.sm
Posts: 2
Registered: ‎12-18-2012

SW48000 connected to Access Gateway gives “agshow” command gives the message ‘No Access Gateway is registered with this fabric’.

SW48000 connected to Access Gateway gives “agshow” command  gives the message ‘No Access Gateway is registered with this fabric’. The IO's are not affected everything works fine.

Valued Contributor
felipon
Posts: 688
Registered: ‎06-11-2010

Re: SW48000 connected to Access Gateway gives “agshow” command gives the message ‘No Access Gateway is registered with this fabric’.

Hi,

What code and model is the AG? What is the code running in SW48000? Maybe the device is not Brocade and does not provide this service or maybe your Fabric is not Brocade native.

Rgds

New Contributor
deepak.sm
Posts: 2
Registered: ‎12-18-2012

Re: SW48000 connected to Access Gateway gives “agshow” command gives the message ‘No Access Gateway is registered with this fabric’.


AG Switch is B5480 and FOS v6.4.1a and SW48000 has FOS  v6.4.2a

The command was working before we renamed the AG switch since then we are not getting the output. on a similar fabric everything is working fine. we also tried connecting the AG Switch in current fabric to a working fabric and we get proper output on the working fabric.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.