Fibre Channel (SAN)

Reply
N/A
Posts: 1
Registered: ‎09-23-2013

S0,C0: Internal monitoring of faults has identified suspect hardware, blade may need to be reset or replaced: fault1:16, fault2

We are seeing the following error/warning on our DS5300 switch:

S0,C0: Internal monitoring of faults has identified suspect hardware, blade may need to be reset or replaced: fault1:16, fault2

S0,C0: Internal link errors have been reported, no hardware faults identified, continuing to monitor for errors: fault1:17, fau

We are running code v6.3.1a.  Would updating the OS possibly resolve the issue?  Is it safe to update the OS when the above is triggering?

Thanks in advance.

Valued Contributor
Posts: 931
Registered: ‎12-30-2009

Re: S0,C0: Internal monitoring of faults has identified suspect hardware, blade may need to be reset or replaced: fault1:16, fault2

It's clearly something inside the box, perhaps fixed by an update perhaps not.

I these errors continue to pop up I would log a call with (OEM vendor) support to get to the bottom of this.

Have supportsaves ready for them

Valued Contributor
Posts: 531
Registered: ‎03-20-2011

Re: S0,C0: Internal monitoring of faults has identified suspect hardware, blade may need to be reset or replaced: fault1:16, fault2

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.