Fibre Channel (SAN)

RouteTest

by on ‎09-12-2003 01:00 AM (364 Views)

DETAILED DESCRIPTION <br/>

<br/>

With this utility, the user provides 2 wwns and it tells you the route that is currently being used between the 2 devices (you can also use domain,port references). After it gets the route - it will then check zoning to see if the 2 devices are in a zone together, tell you which one or say that the 2 devices cannot talk to each other due to zoning restrictions. <br/>

<br/>

REQUIREMENTS <br/>

<br/>

Operating System Windows NT/2K <br/>

<br/>

Interface CLI <br/>

<br/>

Fabric Operating System One of the following at a minimum:<br/>

<br/>

2.6<br/>

<br/>

3.0 <br/>

4.0 <br/>

<p/>

Other Usage: routetest <a class="jive-link-adddocument" href="http://community.brocade.com/home/community-document-picker.jspa?communityID=2006&subject=-ipIpAddress">-ip IpAddress</a> <a class="jive-link-adddocument" href="http://community.brocade.com/home/community-document-picker.jspa?communityID=2006&subject=-uUser">-u User