Fibre Channel (SAN)

Reply
Eli
Contributor
Posts: 30
Registered: ‎03-14-2012

Resetting DCX to factory defaults

Hello,

I need to reset DCX to factory setting (reset all configuration and definitions).

However, the DCX included port slot cards when powered off.

The configuration of the director wasn't swiped prior to power off.

While in storage, we took the port slots to other directors in our enviorment.

 

Now the DCX was powered up without any port slots, and comes up with no errors.

 But when I trying to reset the configuration, or delete logical switches - it can't be done. The director remeber the port slots that he had, and I can't delete any logical switch, nor reset the configuration.

Importent notice: when "lscfg --show" command is issued, no ports shown at all.

 

Any ideas?

 

Thanks,

Eli

Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: Resetting DCX to factory defaults

Hi,

 

 

try disabling the switch and then executing "configremoveall -all" (root access required). Once done that execute 'configdefault'.

 

 

Rgds,

Felipon

Eli
Contributor
Posts: 30
Registered: ‎03-14-2012

Re: Resetting DCX to factory defaults

Didn't help.

It cleared all configuration, but didn't deleted the Logical Switch configurations.

Occasional Contributor
Posts: 8
Registered: ‎10-31-2014

Re: Resetting DCX to factory defaults

try cfgclear

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.