Fibre Channel (SAN)

Reply
New Contributor
Posts: 2
Registered: ‎01-18-2013

Reset to default setting Brocade 300

Hi sorry for my englisch . I am beginner with FC . I have Brocade 300 without knowing admin password .How I change password for this device ? I try default root and password. Not work . With serial cable I connect to FC , why I set password ?

thanx

External Moderator
Posts: 4,929
Registered: ‎02-23-2004

Re: Reset to default setting Brocade 300

default credentials are:

admin = password

if both password was changed, you must reset it with "password recovery procedure"

search here in the community, you may find a lot of thread how to.

Message was edited by: Antonio Bongiorno

TechHelp24
New Contributor
Posts: 2
Registered: ‎01-18-2013

Re: Reset to default setting Brocade 300

And if I want reset device to factory setting ? Must I reset password ? I try boot with parameter -s but not affect , the boot is normal and cannot I use  /etc ...

Valued Contributor
Posts: 761
Registered: ‎06-11-2010

Re: Reset to default setting Brocade 300

Hi,

Once you have been able to access CLI, try configdefault -all. That should reset the config to factory defaults. Unfortunately, this command resets nonpersistent configuration parameters only. The following parameters are

not affected by this command:

• Ethernet MAC address, IP address, subnet mask, and boot ROM parameters

• IP gateway address

• License keys

• OEM customization

• Product ID and Vendor ID

• SNMP configuration

• iSCSI configuration

• System name

• Chassis name

• World wide name

• Zoning configuration (includes aliases, zones, and configurations)

• Security parameters and policies

• User account passwords (includes all user configuration and all built-in accounts)

• Switch PID format

• Ethernet Link Mode

Check FOS Command Reference Manual to change SNMP, Names, IP Addresses to defaults...

Rgds

External Moderator
Posts: 4,929
Registered: ‎02-23-2004

Re: Reset to default setting Brocade 300

--->>> I have Brocade 300 without knowing admin password .

--->>> And if I want reset device to factory setting ? Must I reset password ?

before you can do anything/command, must login to the switch.

and the First Step is to reset the password with pwd recovery procedure.


TechHelp24

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.