Fibre Channel (SAN)

Reply
Occasional Visitor
Posts: 1
Registered: ‎08-21-2013

RSCN Type Codes

Novice SAN admin here.  Hope this question is not too lame.

 

Brocade 300 with v6.4  When I do an interfaceshow I see the LastSCN field on the active ports have a 32 or 16 etc..  Where can I find a list of what these codes mean?  I've searched and searched and I'm getting nowhere.

Thanks

Contributor
Posts: 33
Registered: ‎05-12-2013

Re: RSCN Type Codes

Source: http://community.brocade.com/dtscp75322/attachments/dtscp75322/fibre/5692/1/447-01_PortlogDump_Reference.pdf

 

 

0 UNKNOWN Port status is unknown

1 ONLINE Port is online (in active state)

2 OFFLINE Port is offline

3 TESTING Port is in use by diagnostics

4 FAULTY Port is marked faulty

5 E_PORT Port is an E_Port

6 F_PORT Port is Fabric aware port (F or FL)

7 SEGMENTED Port is segmented

8 T_Port Port is a trunking port, not trunk master.

9 AC_PORT Port is active; link reset is done for E_Port or master trunk port.

10 LIP_ONLINE Loop initialization occurred.

11 LR_Port Port is active; link reset is done for non-E_Port.

12 FLOGI_DOC FLOGI device

13 FORCE_OFFLINE Force OFFLINE a port that is already OFFLINE

14 BUF_ONLINE Became online by acquiring free buffers.

15 BUF_OFFLINE Became offline due to lack of buffers

16 DOMAIN_VALID A valid domain was reported.

17 DOMAIN_INVALID An invalid domain was reported.

18 DOMAIN_REACHABLE A reachable domain was reported.

19 DOMAIN_UNREACHABLE An unreachable domain was reported.

20 Switch ONLINE A switch came online.

21 Switch OFFLINE A switch went offline.

22 Zoning Configuration Change A zoning configuration change occurred.

23 SWD_Switch_Heartbeat_Req

(Watchdog probe timer expired)

The software watchdog (which monitors Fabric OS modules

on the kernel) probing timer expired.

24 SWD_Switch_Register_Req

(Software Watchdog register request)

The software watchdog (which monitors Fabric OS modules

on the kernel) sent a register request.

25 PASSWD_CHANGED

26 SW_PERSISTENT_DISABLE Sent when the switch is ready, i.e. after POST if POST is

running, and the switch is currently persistently disabled.

27 REM_DOMAIN_SET Routes to remote domain are set up

28 REM_DOMAIN_CLEAR Routes to remote domain are cleared

120 FLOGI_DCC FLOGI device

121 FORCE_OFFLINE Force OFFLINE a port that is already OFFLINE

122 BUF_ONLINE became online by acquiring free buffers

123 BUF_OFFLINE became offline due to lack of buffers

128 FCP message probe, start probing Fibre Channel Protocol - message probing started.

129 FCP message flush, stop probing Fibre Channel Protocol - message probing stopped.

135 NS message update area Name Server update area

136 NS message add area Name Server add area

137 NS message delete area Name Server message delete area

138 Route all done Both domain and are routes are done.

144 ROUTE_ALL_DONE Both domain and are routes are done.

145 Update SCR data State change registration data update

 

 

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.