Fibre Channel (SAN)

Reply
New Contributor
Posts: 3
Registered: ‎06-05-2011

RBAC Matrix is not valid after Downgrade FOS 7.0.0 to 6.4.x

Hi,

i have problem after Downgrade FOS 7.0.0 on brocade 360E to FOS v.6.4.2. After downgrade and rebooted switch by self, i can't use webtools.

I get message like this attachment.

Anyone can help to solve this issue ?

brocade - error after replace microcode.jpg

Thanks.

Yohanes Tjie.

New Contributor
Posts: 3
Registered: ‎06-05-2011

Re: RBAC Matrix is not valid after Downgrade FOS 7.0.0 to 6.4.x

Fyi,

Case closed by changing IP Address.

Thanks. 

New Contributor
Posts: 3
Registered: ‎06-05-2011

Re: RBAC Matrix is not valid after Downgrade FOS 7.0.0 to 6.4.x

But, the original IP can't use anymore. need to know how to clean up config, so i can use the original IP again. ..

Need more advice .. 

N/A
Posts: 1
Registered: ‎09-27-2009

Re: RBAC Matrix is not valid after Downgrade FOS 7.0.0 to 6.4.x

I have the same problem. tried erasing all the configs.

and issuing a 'firmwarecleaninstall'  must be something left over from the 7.0 install.

N/A
Posts: 1
Registered: ‎02-07-2012

Re: RBAC Matrix is not valid after Downgrade FOS 7.0.0 to 6.4.x

Clear the Java cache!

I did the same thing

Changing the IP worked, but I could no accept that as a solution since so many of us have saved bookmarks to our switches (and I was the only one with the access problem - likely because I was the only one that accessed the switch while it ran the 7.0 code level...)

How to clearing the cache:

In Windows: Go to the Control Panel, open Java, on the "General" tab, click on "Settings" under "Temporary Internet Files".

click on "Delete Files..."

THAT - resolved the problem for me.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.