10-09-2012 01:55 AM
One of our brocade switches has a "Marginal status ".
Error log :
|Sv Jan 15 2012 21:05:55 GMT+00:00||Warning||Res Flash 0, is above high boundary(High=85, Low=0). Current value is 87 Percentage(%).||Switch||1107||1||FW-1402||fcsw-m1-1|
|Sv Jan 15 2012 21:06:19 GMT+00:00||Warning||Switch status changed from HEALTHY to MARGINAL.||Switch||1108||1||FW-1424||fcsw-m1-1|
Fabric OS: v6.0.0b
Made on: Fri Jan 18 21:32:13 2008
Flash: Fri Jan 23 11:47:32 2009
I have tried supportsave -R, but did not help. No core files found.
What can I do next?
Can I see the flash filesystem?
10-09-2012 02:06 AM
--->>>Can I see the flash filesystem?
about FW-1403, this message is usually visible if Flash percentage is increases.
login as "root" execute the command df to verify the used flash percentage.
FW-1424 stay indicated:
Indicates that the switch status is not in a healthy state. This occurred because of a policy violation.
Run the switchStatusShow command to determine the policy violation.
FW-1402, try with the command "supportsave" to move dump file to FTP.
10-09-2012 04:12 AM
But I understood, that "supportsave -R" should delete dump file as well. Is it right? Or I have to use "supportsave" to move dump file as you described.
df output :
Filesystem 1k-blocks Used Available Use% Mounted on
/dev/root 121008 99992 14772 87% /
/dev/hda1 120992 98736 16012 86% /mnt