Fibre Channel (SAN)

Reply
Occasional Contributor
Posts: 13
Registered: ‎06-12-2015

Locate a ICL blade in a DSC

Hi

We need to re-seat a ICL CORE BLADE   52     CORE8  in a DCX

I wonder if there is a comnmand we can use to loacte the blade in the chassis so its easier to find, and so we dont pull the wrong blade ?

Brocade Moderator
Posts: 13
Registered: ‎03-10-2015

Re: Locate a ICL blade in a DSC

Hi,

 

The slots are identified 1 to 12 from the left to the right while looking at the port side of the chassis.

 

the core blades are located in slots 5 and 8

:root> slotshow

 

Slot   Blade Type     ID    Status

-----------------------------------

  1     SW BLADE     51     ENABLED

  2     SW BLADE     51     ENABLED

  3     SW BLADE     51     ENABLED

  4     SW BLADE     55     ENABLED

  5     CORE BLADE   52     ENABLED

  6     CP BLADE     50     ENABLED

  7     CP BLADE     50     ENABLED

  8     CORE BLADE   52     ENABLED

  9     UNKNOWN             VACANT

 10     SW BLADE     51     ENABLED

 11     SW BLADE     51     ENABLED

 12     SW BLADE     51     ENABLED

 

Kind regards

Rick

Kind regards,
Rick

If my response has solved your query please click the "Accept as Solution" button.

Any and all information provided by me is not reviewed, approved or endorsed by Brocade and is provided solely as a convenience for Brocade customers.

All systems and all networks are different and unique. If you have a service affecting network problem, please open a TAC service request for service through Brocade, or through your OEM equipment provider. .
Valued Contributor
Posts: 539
Registered: ‎03-20-2011

Re: Locate a ICL blade in a DSC

Or, if you have a so called "4 slot" chassis, then you have two port blades, then core, CP, one more CP, one more core and again two port blades.

You can use "portbeacon" command to flash a number of ports on the blade you need to highlight.

Join the Community

Get quick and easy access to valuable resource designed to help you manage your Brocade Network.